Comparative analysis of the main active components and hypoglycemic effects after the compatibility of Scutellariae Radix and Coptidis Rhizoma

In this study, a rapid and highly sensitive ultra high performance liquid chromatography with triple quadrupole mass spectrometry method with the mobile phase of acetonitrile and 0.1% aqueous formic acid was established and successfully applied to comparatively analyze main active components after their compatibility. Besides, the effects of Scutellariae Radix, Coptidis Rhizoma and combined extracts on type 2 diabetic rats induced by high‐fat diet along with low dose of streptozocin were investigated. Under the optimized chromatographic conditions, good separation of seven target components was achieved within 12 min. All calibration curves exhibited good linearity (R² ≥ 0.999). The relative standard deviation of precision, repeatability and stability varied from 0.69 to 2.23, 0.98 to 2.56, and 0.92 to 2.57%, respectively. The recovery ranged from 91.11 to 105.35%. The contents of seven active components were notably reduced after compatibility; however, the hypoglycemic effect of combined extracts was stronger than single drug by decreasing the activities of fructose‐1,6‐bisphosphatase, glucose 6‐phosphatase, phosphoenolpyruvate carboxykinase and increasing the activities of glucokinase, phosphofructokinase, pyruvate kinase. Accordingly, the established analytical method was accurate and sensitive enough for quantitative evaluation of seven investigated compounds. Moreover, the combined extract had definite effects on type 2 diabetes through multiple components against multiple targets.     

Stable isotope dilution assay for the accurate determination of tricaine in fish samples by HPLC–MS–MS

Tricaine methanesulfonate is one of most commonly used anesthetics in fish during blood sampling, artificial propagation and long‐distance transportation. In this study, an accurate method for the quantitative determination of tricaine in fish samples by a stable isotope dilution assay coupled with high‐performance liquid chromatography–triple quadrupole mass spectrometry was developed. Tricaine‐D₅ was synthesized and used as an isotopically labeled internal standard for the determination of tricaine. The analytical performance of the method was validated for tricaine determination in marine fish and freshwater fish. The determination of tricaine was linear in the range of 2.0–200.0 μg L^?1. The limit of detection and limit of quantitation for fish muscle tissues were 1.0 and 4.0 μg kg^?1, respectively. Good recoveries were obtained in the range of 92.08–97.50%. The inter‐ and intra‐assay relative standard deviations (RSD values) were investigated, and the values were 0.39–3.01 and 0.85–2.77%, respectively. The values of CCα and CCβ were 10.21–10.43 and 10.42–10.87 μg kg^?1, respectively. The clearance of MS‐222 from grass carp was further studied using our method. The results demonstrate that MS‐222 could be well absorbed and rapidly eliminated after bath administration.     

“聚丙烯酸酯的合成及降凝性能评价”综合实验能力考核平台

设计了以柴油中饱和烃含量及碳数分布测定、聚丙烯酸高级醇酯（PTA）的合成与纯化、PTA的红外表征与分子量测定、PTA降凝性能评价等4个模块组成的综合实验，作为化工专业实验的考核及成绩评定平台。这种考核方式将过程考核与结果考核融合，将笔试、操作、设计融合，可以全面准确地考核学生的有机合成、仪器分析等基础实验技能，同时考核综述、数据处理、实验设计等综合实验能力和实验室工作素质。此外，还能够有效训练学生的学习能力、解决问题能力、实践能力和创新能力，并促进了实验教学水平提高。     

The optimization of hydrothermal process of MoS_2 nanosheets and their good microwave absorption performances

In this study,flower-like MoS_2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S) in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS_2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS_2 is a candidate for a practical microwave absorbent.     

Resolution and isolation of enantiomers of (±)‐isoxsuprine using thin silica gel layers impregnated with l‐glutamic acid,comparison of separation of its diastereomers prepared with chiral derivatizing reagents having l‐amino acids as chiral auxiliaries

Thin silica gel layers impregnated with optically pure l ‐glutamic acid were used for direct resolution of enantiomers of (±)‐isoxsuprine in their native form. Three chiral derivatizing reagents, based on DFDNB moiety, were synthesized having l ‐alanine, l ‐valine and S‐benzyl‐l ‐cysteine as chiral auxiliaries. These were used to prepare diastereomers under microwave irradiation and conventional heating. The diastereomers were separated by reversed‐phase high‐performance liquid chromatography on a C₁₈ column with detection at 340 nm using gradient elution with mobile phase containing aqueous trifluoroacetic acid and acetonitrile in different compositions and by thin‐layer chromatography (TLC) on reversed phase (RP) C₁₈ plates. Diastereomers prepared with enantiomerically pure (+)‐isoxsuprine were used as standards for the determination of the elution order of diastereomers of (±)‐isoxsuprine. The elution order in the experimental study of RP‐TLC and RP‐HPLC supported the developed optimized structures of diastereomers based on density functional theory. The limit of detection was 0.1–0.09 µg/mL in TLC while it was in the range of 22–23 pg/mL in HPLC and 11–13 ng/mL in RP‐TLC for each enantiomer. The conditions of derivatization and chromatographic separation were optimized. The method was validated for accuracy, precision, limit of detection and limit of quantification. Copyright © 2014 John Wiley & Sons, Ltd.     

Vitamin K1 distribution following intravenous vitamin K1–fat emulsion administration in rats

This study investigated vitamin K₁ (VK₁) distribution following intravenous vitamin K₁–fat emulsion (VK₁–FE) administration and compared it with that after VK₁ injection. Rats were intravenously injected with VK₁–FE or VK₁. The organ and tissue VK₁ concentrations were determined using high‐performance liquid chromatography method at 0.5, 2 and 4 h to determine distribution, equilibrium and elimination phases, respectively. In the VK₁–FE group, the plasma, heart and spleen VK₁ concentrations decreased over time. However, other organs like liver, lung, kidney, muscle and testis, reached peak VK₁ concentrations at 2 h. In the VK₁ injection group, the liver VK₁ concentrations were significantly higher than those in other organs at the three time points. However, VK₁ concentrations in the other organs peaked at 2 h. In addition, in VK₁–FE group, the heart, spleen and lung VK₁ concentrations were significantly higher than those in the VK₁ injection group at the three time points, and the liver VK₁ concentration was significantly higher than that in the VK₁ injection group at 4 h. The VK₁ amount was greatest in the liver compared with the other organs. Thus, the liver is the primary organ for VK₁ distribution. The distribution of VK₁ is more rapid when injected as VK₁–FE than as VK₁. Copyright © 2015 John Wiley & Sons, Ltd.     

Na2S–Carbon Nanotube Fabric Electrodes for Room‐Temperature Sodium–Sulfur Batteries

A unique sodium sulfide (Na₂S) cathode is developed, which will allow the use of sodium‐free anodes for room‐temperature sodium–sulfur (Na–S) batteries. To overcome the “inert” nature of the Na₂S, a special cathode structure is developed by spreading the multi‐walled carbon nanotube (MWCNT)‐wrapped Na₂S particles onto MWCNT fabrics. Spectroscopic and electrochemical analyses reveal a series of polysulfide intermediates involved in the charge/discharge of the cell. The Na–S battery prepared in full discharge state with the Na₂S/MWCNT cathode provides a remarkable capacity of 500 A h kg^?1 (based on sulfur mass) after 50 cycles.     

Path to achieving molecular dispersion in a dense reactive mixture

A uniform dispersion of reactants is necessary to achieve a complete reaction involving multicomponents. In this study, we have examined the role of plasticizer in the reaction of two seemingly unlikely reactants: a highly crystalline hexamethylenetetramine (HMTA) and a strongly hydrogen bonded phenol formaldehyde resin. By combining information from NMR, infrared spectroscopy and differential scanning calorimetry, we were able to determine the role of specific intermolecular interactions necessary for the plasticizer to dissolve the highly crystalline HMTA and to plasticize the phenol formaldehyde resin in this crosslinking reaction. The presence of the plasticizer increased the segmental mobility, disrupted the hydrogen bonded matrix, and freed the hydroxyl units, which further increased the solubility of the HMTA. Both the endothermic and exothermic transitions are accounted for in the calorimetric data obtained. For the first time, it is possible to obtain the effective molar ratio of each component needed to complete the crosslinking reaction efficiently. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1519–1526     

煤与生物质混烧灰荷电特性研究

对玉米秸分别与两种煤以不同比例混烧生成的混烧灰进行了荷电特性研究。利用法拉第杯荷电量检测系统和静电低压撞击器(ELPI)测量了混烧灰的总体荷质比及分级荷质比,并借助于成分分析及形貌分析结果讨论了其影响机理。结果表明,随着生物质掺入量在混烧燃料中的增加,混烧灰的成分组成发生变化,使得其介电常数变大,比电阻增大,表面吸附能力增强,从而使混烧灰的总体荷质比有一定的上升趋势。对混烧灰的分级荷质比测量结果表明,排除灰样粒径的影响,生物质的掺入使得混烧灰的荷电能力得以增强,但影响相对较小,颗粒粒径是影响混烧灰荷电能力的主要因素。     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234